Ramisi5

[RichAE91]

Hi i a new onwner of a Ramisis puzzle and was wondering what is the difference between the Ramisis and the Ramisi5.

Thanks

[Karen_G]

Hi RichAE91,

Welcome to the forum and best of luck with opening your Ramisis

what is the difference between the Ramisis and the Ramisi5

The Ramisis has a small marking on the corner of some of the pieces, the Ramisi5 doesn't have any markings except for the placenta. It makes it harder to navigate where you are. The Ramisi5 was created with the first batch of Ramisis, as far as I am aware, they are no longer being produced.

Karen

[RichAE91]

The Ramisis has a small marking on the corner of some of the pieces, the Ramisi5 doesn't have any markings except for the placenta. It makes it harder to navigate where you are. The Ramisi5 was created with the first batch of Ramisis, as far as I am aware, they are no longer being produced.

Karen

so its just the markings that are different? the internal workings of the ramisi5 are the same as the ramisis? its not like the isis and the isis 1a/1b/1c?

Richard

[LouIsis]

so its just the markings that are different? the internal workings of the ramisi5 are the same as the ramisis?

That is correct, the 'intended' difference was mentioned by Karen:

It makes it harder to navigate where you are.

[Trigger]

how do you know which one you have

[LouIsis]

You have a Ramisis if its engraving says "Ramisis" (and has a small marking on the corner of some of the pieces).
You have a Ramisi5 if its engraving says "Ramisi5" (and lacks the abovementioned markings).

[Trigger]

that makes everything much easier. thanks

[Trigger]

Mine says ramisis on the front of the puzzle but i cant find any small marking. Can you tell me where there located or would that be giving too much information?

[LouIsis]

Check out this topic, especially point 5 of the first post:
http://www.isisadventure.co.uk/forum/viewtopic.php?f=43&t=2636
But also read on, and find out it is not as simple as I wrote before.

[Ailurophelia]

I have wondered this for a while, but does anyone else have markings centered at the bottom edge of the middle 3 layers. Everyone talks about them being on the underside at the corners...

[voltrondefender5]

I'm in the same boat as you Trigger. I have a Ramisis without any markings. I was still able to solve it, until i spun the layers too fast and missed opening the key chamber, so I didn't notice anything int he first part, but now that I am trying to put the ball back so I can disassemble it I think the markings would have helped a little. I think I'm in the bottom layer now but am still stuck. Oh well, I'll get it eventually.

[Trigger]

hopfully i will be able to open mine too

[Trigger]

I have wondered this for a while, but does anyone else have markings centered at the bottom edge of the middle 3 layers. Everyone talks about them being on the underside at the corners...

i have those things on m ramisis too