i was going crazy brought the clues and didn't no what they were for
cheers
A new adventurer with some loaded questions.
19 posts
• Page 2 of 2 • 1, 2
by Feep » Thu Dec 20, 2007 5:49 am
Well, I've made a bit of progress...I believe I have the third in play and I've discovered some of the....ah...electromechanical properties of the sphere...
But I just wanna say, I recommend WD-40 for everyone. A little spray into the button and the thing's a fluid wonder. Yay WD-40!
But I just wanna say, I recommend WD-40 for everyone. A little spray into the button and the thing's a fluid wonder. Yay WD-40!
- Feep
- Isis 5%
- Posts: 14
- Joined: Wed Nov 28, 2007 9:37 am
by Driver » Thu Dec 20, 2007 12:01 pm
Your Isis is factory prepared with the correct amount of lubrication within it. If the rings and button on your Isis are a little stiff to operate apply 1 drop of light machine oil such as 3 in 1 to each ring and the button. Don't use penetrating fluids such as WD 40 as they may have a detrimental effect to the operation of your Isis.
Patience is a virtue seldom found in man....
- Driver
- Isis 5%
- Posts: 358
- Joined: Mon Jan 08, 2007 2:51 am
- Location: Slightly in from the edge of existence
by Feep » Thu Dec 20, 2007 11:59 pm
Well, after pressing the plunger several thousand times, I can assure you that it no longer had the proper lubrication. I was careful to use a very minimal amount of WD-40, and it's been fine ever since. I've reached the halfway stage, in any case! = D
- Feep
- Isis 5%
- Posts: 14
- Joined: Wed Nov 28, 2007 9:37 am
19 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 9 guests