Plunger Woes (or, the saga of my aching fingers)

Clue help and progress on solving the Isis

Plunger Woes (or, the saga of my aching fingers)

Postby Happyhannah » Thu Nov 01, 2007 1:07 am

Hmmm.

My friend has stolen my NKryptor (as I remain, despite helpful hints, woefully unable to open it) so I'm back to plugging away - literally - at my Isis again.

Now then, this post is taking me about fifteen times longer to post than usually because my fingers are so stiff from pushing the bloody plunger. Sometime it seems that it sticks and won't go all the way down, but I think that so far it's just my fingers giving up on me.

So, a question:

Will I be able to tell when I've "reached the halfway stage" clearly (as in it's a very "solid" half-way stage), or is it something fleeting that might not be ... so solid...? I just don't know whether I'm getting there or whether it's just my fingers, or perhaps simply a lack of lubrication :-$
User avatar
Happyhannah
Isis Copernisis Tessarisis 5%
 
Posts: 698
Joined: Wed Feb 28, 2007 12:37 am
Location: Rutland, UK

Re: Plunger Woes (or, the saga of my aching fingers)

Postby bluesign2k » Thu Nov 01, 2007 1:25 am

I know what you mean about the NKryptor... that took me ages, possibly the most frustrating puzzle in the world in my opinion :D

The short answer to your question is yes, you will certainly know; the long answer can be found inside the 5% club :wink:

My plunger did start to go a bit stiff once :oops:, a small drop of 3-in-1 oil down the plunger hole did the trick :wink:
User avatar
bluesign2k
Isis Ramisis Copernisis 5%
 
Posts: 1320
Joined: Wed Dec 27, 2006 7:55 pm
Location: Worcestershire

Postby kavin2468 » Thu Nov 01, 2007 1:25 am

You should notice it as the clue says but don't expect the button to fly up into the air or anything xD
kavin2468
Isis 5%
 
Posts: 100
Joined: Tue Oct 30, 2007 12:09 am
Location: 4M3R1C4

Postby Happyhannah » Thu Nov 01, 2007 1:29 am

Thanks, both of you!

I think I may be suffering like bluesign2k, and might just need a bit of WD40 down it. It seems to *almost* stick, but if I REALLY push it is just gives way again.

Hmmm.
User avatar
Happyhannah
Isis Copernisis Tessarisis 5%
 
Posts: 698
Joined: Wed Feb 28, 2007 12:37 am
Location: Rutland, UK

Postby bluesign2k » Thu Nov 01, 2007 1:35 am

Happyhannah wrote:Thanks, both of you!

I think I may be suffering like bluesign2k, and might just need a bit of WD40 down it. It seems to *almost* stick, but if I REALLY push it is just gives way again.

Hmmm.


Yeh, this was my issue. I managed to completely stop this by removing the plunger and cleaning it and the hole, then using some thin oil. Clearly you won't be able to remove the plunger (yet), but some oil should help :)
User avatar
bluesign2k
Isis Ramisis Copernisis 5%
 
Posts: 1320
Joined: Wed Dec 27, 2006 7:55 pm
Location: Worcestershire

Postby Happyhannah » Thu Nov 01, 2007 1:38 am

Damnit, I thought I was getting somewhere :-(

Thanks anyway! I'll definately put some thin oil in to quash my false hopes ;-)
User avatar
Happyhannah
Isis Copernisis Tessarisis 5%
 
Posts: 698
Joined: Wed Feb 28, 2007 12:37 am
Location: Rutland, UK

Postby Driver » Thu Nov 01, 2007 3:28 am

Don't go mad with the oil, a couple of drops is more than enough..
Patience is a virtue seldom found in man....
Driver
Isis 5%
 
Posts: 358
Joined: Mon Jan 08, 2007 2:51 am
Location: Slightly in from the edge of existence

Postby Nowicki222 » Sat Nov 03, 2007 3:39 pm

I am at the same stage as you happy hannah :? I can make the placentas move 1 cm apart as many times as I want :D , but I cant get to the halfway stage. I am pressing the plunger, my fingers are aching but still it goes all the way down. :? Also I am not sure if I am supposed to be trying to get to the halfway stage while my placentas are at 1 cm apart stage, or while they are realigned. :( Another thing I am not sure about is the 180 degrees apart stage. Does it come after the 6th clue or 8th clue?
User avatar
Nowicki222
Isis 5%
 
Posts: 26
Joined: Fri Oct 12, 2007 10:21 pm


Return to Clues and progress

Who is online

Users browsing this forum: No registered users and 8 guests

cron