Page 1 of 1

Is this a problem?

PostPosted: Thu Oct 16, 2014 1:30 pm
by Pyro3000
I can't seem to get to the halfway point and I'm curious if the alignment of the halves is an issue. I can't turn the center ring at all because of how tighty assembled this thing is. I've created a biggest multiverse imaginable at this point (though once I heard a clunk noise. I think my wife reset it when she was harmlessly looking at it earlier). I don't recall it being misaligned when I first got it. Will this stop me from reaching the halfway point?

Image

Re: Is this a problem?

PostPosted: Thu Oct 16, 2014 2:47 pm
by Pyro3000
Found that if I press the plunger in harder I hear a pop and it goes further in. I'm confused on if that means I'm halfway or if something inside is broken.

Re: Is this a problem?

PostPosted: Thu Oct 16, 2014 3:49 pm
by Orko
The ring should not stuck, but that should not be a problem. :)

Re: Is this a problem?

PostPosted: Thu Oct 16, 2014 4:39 pm
by Flo
And the placentas seem to be in right position. All sounds normal. If your isis is new, it's possible that the rings don't easily turn, they'll probably become easier to manipulate if you go on trying to turn it. Mine had this problem, as my ramisis, at the beginning, but with little time this disappeared.

Re: Is this a problem?

PostPosted: Thu Oct 16, 2014 4:42 pm
by Pyro3000
Hmmm thanks for the feedback. The ring is actually moving again so I don't think it's as jammed as I originally thought. Good to know the misalignment (or I guess proper alignment) shouldn't be an issue. I'm going to get some WD40 on the middle and try again and maybe it'll loosen the halves up. It's making noises again so maybe it all popped back into place. But I KNOW something happened earlier when the ball went silent. It's just that final step that's getting me. I know it. :x

Re: Is this a problem?

PostPosted: Thu Oct 16, 2014 4:50 pm
by Flo
The ball went silent? That's a sign you're on the right way^^ Go on...

Re: Is this a problem?

PostPosted: Thu Oct 16, 2014 6:07 pm
by Pyro3000
Okay. Progress has been made now. I was unscrewing in the wrong direction.

Anyway, now my placentas are 1cm apart and there's only one ball to be heard and it barely moves. Other topics seem to hunt it needs to be reset somehow...

Re: Is this a problem?

PostPosted: Thu Oct 16, 2014 9:52 pm
by Pyro3000
SOLVED IT. Submitted for 5%. Thanks for telling me it was still doable. I was getting close to just giving up and sending it in for repairs lol.

Re: Is this a problem?

PostPosted: Fri Oct 17, 2014 12:03 pm
by Flo
Hé hé!! You did it! Congratulations! That was the same thing for me: I wondered if I had broken sth inside and suddenly it screwed !

Be patient, a gatekeeper will open your 5% access soon.

Re: Is this a problem?

PostPosted: Fri Oct 17, 2014 3:59 pm
by Orko
Well done, i was sure you will get to that point. :lol:

Re: Is this a problem?

PostPosted: Mon Oct 20, 2014 8:21 am
by evilkeen
Well done!