The Isis Adventure

Posted: **Sun Nov 13, 2011 5:56 pm**

Hello all,

I am a newbie. I deciphered the clues and found clue 11 on the forums. i believe i was at the halfway mark and was able to separate the placentas a centimeter. I released the plunger and now i am not able to move the Isis at all, also i am able to press the plunger all the way in now. i can hear the larger BB moving slightly, and if i shake hard enough i can hear the smaller one.

Can someone let me know if i jammed it? or how to reset it, Help!! ;-)

Posted: **Sun Nov 13, 2011 6:09 pm**

Hi there, I have sent you a PM

Posted: **Sun Nov 13, 2011 6:25 pm**

Thanks evilkeen!! that is what i figured... now to get it unstuck! ;-)

Posted: **Sun Nov 13, 2011 7:13 pm**

I got it open!!! woo hoo...

Posted: **Mon Nov 14, 2011 12:47 am**

Posted: **Tue Jan 03, 2012 4:42 am**

Good evening,. I believe I'm in the "limbo" reset issue stage as well,.

I opened the Isis last week (and have the key registered on the website),.then reassembled it fine a couple times,./ but this last time I didn't get it completely closed,. teh placenta's are about 180 degrees apart with a 1 mm space between the top ring,. Is here a way to reset/reopen it without damaging it?

Much thanks in advance

Madi..

Posted: **Thu Jan 05, 2012 11:39 pm**

Hi folks

My Isis got stuck in reset limbo on the first go. The placentas are stuck 45 degrees apart with a 2 or 3 mm gap.

Any advice is much appreciated!

Posted: **Sat Jan 07, 2012 2:41 am**

Hi and welcome!

You have a PM, good luck getting unstuck!

Posted: **Mon Jan 09, 2012 3:17 pm**

evilkeen wrote:Hi and welcome!

You have a PM, good luck getting unstuck!

Stuck as well,. see previous post above,.. thanks in advance,.

Posted: **Mon Jan 09, 2012 5:57 pm**

OK, you have a PM too (sorry you should have had one sooner!)...

Posted: **Mon Feb 20, 2012 4:58 am**

I am in the same predicament. Anyone please help. The placentas are 180 degrees from each other and I can't get the top bearing to drop by hitting it

Posted: **Mon Feb 20, 2012 11:07 pm**

All depends on its current state - you have a PM anyway!

Posted: **Thu Mar 15, 2012 7:48 pm**

I'm at the same spot, placentas are 180 degrees with a small gap between pieces please help

Posted: **Sun Jul 29, 2012 8:00 pm**

Hi there,

I also managed to get my isis stuck in the process of screwing it back together. It just stopped mid-way. This thread suggests there is a solution to this issue. Will someone share it with me?

Thanks
Brett

Posted: **Mon Jul 30, 2012 1:59 pm**

Did you manage to get a picture of it open for access to the 5% club? You'll find some info in there... If not, drop me a PM.

The Isis Adventure

Isis Stuck

Isis Stuck

Re: Isis Stuck

Re: Isis Stuck

Update

Re: Isis Stuck

Re: Isis Stuck

Re: Isis Stuck

Re: Isis Stuck

Re: Isis Stuck

Re: Isis Stuck

Re: Isis Stuck

Re: Isis Stuck

Re: Isis Stuck

Re: Isis Stuck

Re: Isis Stuck