The Isis Adventure

by **jazz** » Sat Nov 29, 2008 1:27 pm

The fourm is a bit cluttered, So I'm trying to find out how many of us are stuck at the half way stage :evil:

Please if you have completed the Ramisis do not post on this thread

It is impossible to talk openly about our thoughts on where we are at so if enough poeple are stuck maybe we can get our own private club to get our thoughts out into the open

by **adamwest** » Sat Nov 29, 2008 9:25 pm

I think that my key should have popped out but it didn't.

glewra wrote:
bluesign2k wrote:
glewra wrote:...Having got the key out and got the ball back into layer 1 I'm stuck at this stage, like a lot of other people i guess. I seem to be stuck in a circular track with a slot in one side with no means of escape. I've been through every possible combination of layer position to no avail, I've had the ball in the slot while rotating the layers in every conceivable orientation, but still nothing. I can't being to imaging what's going on in there...
Yup, that's exactly where I am!
I used to be able to get it such that the top section would stop rotating anticlockwise when the placenta got to the back, but I can't even do that now. Although my guess is that getting to that stage again is a backwards step.

I think so too - I think that's back to the original key chamber opening area.

I can't help thinking the solution to this is something to do with the slot. If i get the ball in there it tends to stay there unless the Ramisis is tapped. I've also thought that perhaps the slot is a way of getting the ball out of the way for something to happen in the area (through rotation) but alas, nothing seems to work.

I can do everything they mentioned above but still never got the chamber to open up. this is the longest first date in history :wink:

maybe i missed something when the object is down and top section would stop rotating anticlockwise when the placenta got to the back. is this the point where the chamber should open?

adam

I honestly don't know what to do now I can't go further without the clues and I can't seem to get back.

oh well I guess i will just have to keep plugging along. IF ANYONE THINKS THAT I HAVEN'T REALLY GOT TO THE PUT WHERE MY KEY SHOULD COME OUT THEN PLEASE TELL ME THAT WAY I KNOW WHERE I STAND.

adam

by **themagicdude** » Sat Nov 29, 2008 11:47 pm

That's where i am too. I know exactly what i need to do to move the bb from the "top layer" which I'm beginning to believe is actually in the 3rd layer from the top. (I originally thought that this was the top or second from top layer, but i've recently decided that that idea was incorrect.) I can make the top layer stop at 180 degrees when rotating anticlockwise, but that's about all i can do. I'm officially lost.

by **adamwest** » Sun Nov 30, 2008 1:01 am

themagicdude wrote:That's where i am too. I know exactly what i need to do to move the bb from the "top layer" which I'm beginning to believe is actually in the 3rd layer from the top. (I originally thought that this was the top or second from top layer, but i've recently decided that that idea was incorrect.) I can make the top layer stop at 180 degrees when rotating anticlockwise, but that's about all i can do. I'm officially lost.

did you get the key?

by **maka0020** » Sun Nov 30, 2008 1:12 am

i agree that the top layer[s] are not accessible by the bottom bb. The bb up top seems to stay up there and may have to be used to trigger some mechanism to open up something on the middle/bottom layers.. in the whole time i have played with the ramisis i dont think i have moved the bb from top out of those two layers. anyone else feel this way?

by **Happyhannah** » Sun Nov 30, 2008 12:59 pm

I'm really not sure where I'm at.

I got something to the top, then I got it to go silent, then the top layer wouldn't turn all the way round (like at the beginning).

Then something went "click" and the key chamber popped open by about 2 or 3 mm but no further, after which the top layers would rotate normally. Then it went back to sounding just like it had before, I couldn't hear any difference.

Then, it slipped out of my fingers and when I caught it I pushed the key chamber back in again! Argh! Now I've got the thing near the top again, but not silent. Was that 3mm actually a stage? Or just an accident? Have I buggered it up now or will I be able to get it out again?

by **steve** » Sun Nov 30, 2008 3:11 pm

You haven't broken it, your Ramisis will still open.

by **themagicdude** » Mon Dec 01, 2008 5:52 am

adamwest wrote:
themagicdude wrote:That's where i am too. I know exactly what i need to do to move the bb from the "top layer" which I'm beginning to believe is actually in the 3rd layer from the top. (I originally thought that this was the top or second from top layer, but i've recently decided that that idea was incorrect.) I can make the top layer stop at 180 degrees when rotating anticlockwise, but that's about all i can do. I'm officially lost.

did you get the key?

Nope, should I have the key by now?

by **cornettracing80** » Mon Dec 01, 2008 7:18 am

wow......

puzz would kick me so hard i would taste his boot if i answered any of those questions....

by **adamwest** » Mon Dec 01, 2008 2:32 pm

cornettracing80 wrote:wow......
puzz would kick me so hard i would taste his boot if i answered any of those questions....

with what we are paying for PUZZ's Puzzles you shouldn't taste "boot" you should that expensive italian shoe :wink:

adam

by **cornettracing80** » Tue Dec 02, 2008 4:18 am

sorry jazz i didnt see that you didnt want me posting on here....guess i shoulda read the top better...i voted too...key out sorry

by **adamwest** » Tue Dec 02, 2008 4:27 am

cornettracing80 wrote:sorry jazz i didnt see that you didnt want me posting on here....guess i shoulda read the top better...i voted too...key out sorry

wow stupid american never reading the instructions what shall we do with you? :wink: